As you cultivate your land to add new flower beds and garden features, you will surely unearth different rocks which you could put to use as decoration throughout your garden. Among the simplest ways to utilize those stones or alternative stones you may have on hand would be always to make edging for your blossom beds. Stone edging makes your flower bed boundaries look more like natural features. Landscape stones also give moderate prevention against weeds to maintain the appearance of a well-manicured, weed-free garden. Rock edging doesn’t require a gravel foundation layer since slight sinking enhances the appearance.
Assess the landscape stones to discover the typical size to use as a guide for installing the edging. Determine how much of the stones you would like to bury in the ground, usually involving one-third and one-half of the total rock height.
Dig a trench a few inches wider than the landscape stones and also to the thickness you wish to soften the stones, and about about 2 inches. Cut the edge with a half-moon edger, then remove the turf and dirt with a spade. Check the ground with a flat and move soil as needed to create a level foundation; pack the dirt gently when you attain degree.
Spread 2 inches of sand level in the bottom of the trench, providing a foundation material to place the stones in place.
Put the landscape stones side by side at the edging trench, spacing them as close together as possible. Choose rocks that are near the exact same height, width and thickness so the edging is uniform. Harness the top of every rock with a rubber mallet to place them in place from the sand base layer.
Fill in the trench across the stones with clean fill dirt; you could use the dirt you previously removed from the trench, but be sure to remove as much of the grass and grass roots as possible.
Pack the soil firmly to hold the stones in place. Spread mulch up against the face of the stones that faces the flower bed to help prevent weeds from spreading to the flower bed. The mulch layer in plant beds is generally 2-3 inches deep, and you ought to spread the mulch so that it slopes downward from the top of the mulch layer to the base of the stones.