If you’re searching for an attractive roof alternative for your home, consider”S” clay tiles. The tile installation process involves placing classes of furring strips onto the roof. The clay tiles’ lips hook across their monitoring and the strips interlock developing a roof that is secure and strong. They might require replacement due to falling branches or corrosion from normal wear and tear Even though the tiles are durable.
Put a 2-by-4 object of timber face up onto a flat work surface. Measure 12 inches down the amount of the timber and place a mark. Slide a framing square and scribe a line directly across the face of the timber.
So that it sits diagonally in the board end to the line lay angle one of the blades, and the framing square in addition to the timber confront; the layout on the board face will seem like two wedges. Cut along the first line with the circular saw to form a wedge. Cut along the angled line to shape another wedge.
Locate the damaged”S” tile onto the roof. Put the end of their wedge beneath the undamaged tile to the left. Reach on the end of the wedge to lift the front of the tile about 3/4 to 1 inch.
Put the wedge that is second beneath the undamaged tile onto the path over and slightly to the right of the tile. Gently hit on the side of the wedge to raise the path, exposing the upper portion of the tile.
Grasp the tile and move the lug within the furring strip, then slipping it out. Until it breaks tap the tile with a hammer and then eliminate it if it had been fastened to the roof with nails.
Slide the tile in with the drag facing down and to the rear, within the furring strip. Remove the wedges so that the outer perimeter tiles lay on top of their new ones.