The best way to Hang a Dresser Mirror

A mirror centered upwards of a dresser provides a finishing touch to your own bedroom ensemble. If youave just moved right into a new residence, installing mirrors and artwork will rapidly make the the room feel like home. This task isn’t hard, but it’s most easy if there is a helper. In case your mirror currently has hanging wire and d rings on the back, examine them carefully to be certain they’re properly installed and are capable of keeping the mirroras pounds. Take them off when they appear flimsy and install your own strong hanging wire and d rings.

In order to match it to adequately durable components weigh the mirror. One way is to weigh yourself, then request a helper as you support the the mirror to test your fat. The distinction between both numbers is the fat of the mirror.

Purchase mirror-hanging components, which can be available as a package. The kit includes heavy duty mirror wire, d rings, screws, wall anchors and strong photo-hanging hooks. Check the hardwareas requirements on the package to ensure it is going to hold the weight of your specific mirror.

Measure the mirror all the way through using a tape measure, then create a pencil mark the best. about 1/5 of the way down from on either side of the back of the mirror The marks needs to be directly in addition to the mirroras wooden-frame in an area which will let you drill a hole.

Holes in the places you marked having a small energy drill, utilizing a drill bit right for for the screws that included the mirror-hanging package. Screw in the drings together with the drill.

Attach one end-of the heavy duty wire to possibly D-ring twist it till it’s attached, and.

Run the wire through the next D-ring, then straight back to the first. Twist the wire securely to to add it. The wire needs to be taught, or not quite s O.

Produce a pencil mark on the wall a T the peak you desire to suspend the mirror. Center the mark within the width of the dresser.

Make one to the right of the middle mark, one to the left and two mo-Re pencil marks. The the length between these two marks should be about onequarter of the the length involving the d rings you installed on the trunk of the mirror. Use alevel to make sure that the two marks are completely with each other in-line.

Drill holes to both marks, and insert the wall anchors. Screw the photo that is durable -hanging hooks to the anchors.

Ask a helper to assist you mount the mirror. Ensure the wire on the rear of the mirror is positioned over equally hanging hooks.

See related