How to Clean Air Ventilation Ducts Yourself

You should always make sure that the air ducts in your home are clean. If they aren’t cleaned regularly, you might end up with dust mites, or even increase the prospect of allergens if anyone in your home is allergic to dust. Other than that, cleaning the ducts also helps in making your heating Sacramento repair specialists system more efficient. When dust collects in the ducts, the Sacramento AC repair specialists system components are worn out faster because they have to work harder to deliver the right temperature. ac repair Huntsville is a task that most people rarely think about, hence the air in their homes is never as clean as they would want it to be.

Contrary to popular belief, you do not necessarily need a professional vacuum system in order to keep your vents clean. You can clean the ducts without spending on a professional duct cleaner either. By cleaning the ducts on your own, you will not necessarily clean all the corners and parts of the heating Boston repair specialists system, but you will get more than 85% of the cleaning done. The best part about this is that you will not have to spend more than for a furnace filter.

Tools and Equipment

While there are many types of duct systems in the market, most of them operate under the same mechanism. Therefore, cleaning them requires relatively the same technique. The following are some of the things that you will need to do Sacramento AC repair specialists repair Huntsville AL:

Vacuum Cleaner – You need the normal household vacuum cleaner. Depending on the size of your air ducts, make sure you have a good hose attached to it.

Paper Towels – Towels will help you reduce the workload. Use them to cover the registers you have cleaned while working on the others. Otherwise, you will have to do a lot of sweeping and dusting throughout the process.

Furnace Filter – New filters are needed after you complete the cleaning. There’s quite a variety in the market, so choose the appropriate one for your system.

Screwdriver – A screwdriver will help you loose the fasteners holding the registers in place. A ¼” hex driver will come in handy as well.

Brush – Anything like a toilet brush will be useful. In case you can get a paintbrush with stiff bristles, it would be even better.

Cleaning Process

Keep all the supply registers covered with paper towels. This is to make sure that any of the dust being dislodged does not find its way into the rooms.

While you are cleaning, make sure the fan is running. This will help in collecting the loose dust as a result of the brushing.

Ensure the furnace filter is firmly in position. This way, the dust that you are cleaning will not be sucked back to the motors. Knock the air ducts lightly with the brush handle so that dust deposits are dislodged from the duct.

Sweep away the dust from the registers. Make sure your vacuum is running and catch all the dust that the fan is pushing out. While doing this, you should also remove any paper towels that you had put in place earlier.

Unfasten the screws and clean the return air registers. Turn off the furnace and the fan so no power runs through the ducts. Remove the panels and clean the return air boot and the blower compartment. This is usually where most of the dust will have settled during air conditioning repair Huntsville AL.